Will This Part Fit My Appliance?

This is a universal part - please check details / specifications for suitability with your model.

Description

These are universal oven control knobs in white colour. Comes in a set of four with 6 mm, 8 mm, and 14 mm adapters.

The knobs control the heat and the cooking fan inside your oven. Just twist and turn to start activating the controls.

Plus, you can set timers for your baked and roasted creations. This control knob is user-friendly so you can fine-tune everything for precise cooking. 

With use and friction, the mechanical or electrical connections within the knob can deteriorate or fail over time. Change it with this replacement part.

These knobs are a universal spare part. Fits nearly all ovens and hobs with spindle type fittings.

Before ordering, please verify that this part is suitable for your model using our compatibility checker. 

Manufacturers Part Number:

  • UN14130

Will this part fit your appliance?

Use our compatibility checker, Click here.

Finding your model number:

Struggling to find the model number on your Oven? Click here.

Safety note:

Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.

Latest Product Review(s)

3 Customer Review(s)

Knobs

Low cost, easy to fit and very practical. Would recommend.

By Audrey McFadden - Blairgowrie
22nd Apr 2020

Overall

Quality

Value

Ease of Fitting

Solid product

Knobs supplied were for my old hob where one of the originals had disintegrated. Unfortunately my spindles were slightly thinner than the smallest adapter supplied but this was overcome by inserting a small flat piece of plastic into the adapter and now works perfectly. Item would probably fit most cookers and hobs using the supplied adapters. Great solid product even though it did need a bit of adjustment to fit mine.

By Peter Ward - Newcastle upon Tyne
12th Feb 2020

Overall

Quality

Value

Ease of Fitting

Just the job

Bought the cooker knobs for my cooker hob. Couldn't buy the original ones as no longer available but these fitted perfect. So good that I ordered another four for the oven and now my cooker looks as good as new. Great product and great service.

By Jean Franks - Goole
17th Oct 2019

Overall

Quality

Value

Ease of Fitting

Questions And Answers

1 Answer(s)
Are these ok to use on gas burners?
By Richard - Surrey - 11/02/2020
Hi Richard, the universal knobs come with 6mm, 8mm, and 14mm adapters, so as long as they will fit on the gas tap they should be fine to work with your gas hob.
By Jordan - 11/02/2020
1 Answer(s)
Dear, I have a GAGGENAU HLKG491 (E-NR: KG391210/01) and some of my Knobs are broken. It's your replace valid for my kitchen. Thanks
By Jordi - Spain - 08/09/2020
Hi Jordi, these are universal so you'll need to check the listing and confirm your spindle will fit within either the 6mm, 8mm, or 14mm adapters.
By Jordan - 08/09/2020
1 Answer(s)
I just received 8 of these knobs for my electric Zanussi cooker. Unfortunately even the smallest of the adapters is two big for my cooker's spindles. Please advise how / which part you can supply to help me further reduce the holes so they work or if I must return them as unsuitable for my application. Thank you.
By Steven - London - 22/10/2020
Hi Steven, these knobs are supplied with 6mm, 8mm, and 14mm adapters, if these don't work for your cooker you'd need the genuine knobs. Please submit a part enquiry with your model details so we can look in to finding these.
By Jordan - 22/10/2020
1 Answer(s)
Would these fit a Hotpoint Model UH53W S? Thank you.
By Vic - Manchester - 27/01/2021
Hi Vic, these universal knobs come with 6mm, 8mm, and 14mm adapters. If these don't match the spindles you'd need the genuine knobs.
By Jordan - 27/01/2021
1 Answer(s)
Hi, on our baumatic B77 gas hob, the small cone shaped plastic sleeves which fit beneath the control knobs have split, making it difficult to light the respective gas rings. Would the cones featured in kit RS601666 serve as suitable replacements?
By Roy - Fife - 09/02/2021
Hi Roy, these fit the control knobs in the kit, but we wouldn't be able to confirm if they would fit your existing control knob.
By Jordan - 09/02/2021
1 Answer(s)
Would these fit a creda job model number 42361?
By Helene - Cheltenham - 18/03/2021
Hi Helene, these universal knobs come with 6mm, 8mm, and 14mm adapters. You'd need to measure the shaft that pushes in to the knob to ensure these would fit.
By Jordan - 18/03/2021

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed