Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

Acec, AEG, Alno, Arthur Martin, Blomberg, Brandt, De Dietrich, Electrolux, Elektra, Elektra Bregenz, Elektro Helios, Elin, Faure, Firenzi, Frigidaire, Husqvarna, Husqvarna Electrolux, Ikea, John Lewis, Juno, Kuppersbusch, Leonard, Lloyds, Matura, Nardi, Neue, Privileg, Progress, Rex, Seppelfricke, Smeg, Tricity Bendix, Zanker, Zanussi, Zoppas Fridges & Freezers

Description

Genuine magnetic white rubber door seal to maintain your fridge’s internal temperature. Measures 821mm, while its width spans 516mm.

The door seal keeps cold air from escaping and warm air from entering so your food stays fresh longer. No moisture enters so there’s no condensation buildup and food damage.

It lessens the strain on the fridge’s cooling system so it’s energy efficient.

A high-quality door seal gasket reduces your fridge’s noise. 
 
This magnetic white door seal is from AEG. You can also check in with the other suitable brands from the list above.

Before ordering, please verify that this part is suitable for your model using our compatibility checker. 

Manufacturers Part Number:

  • 2248007052

Alternative Part Numbers:

  1. 2248003077
  2. 2248007052
  3. 2348755402
  4. 2426365264
  5. 50117332002

EAN Number:

  • 7321420583472

Will this part fit your appliance?

Use our compatibility checker, Click here.

Finding your model number:

Struggling to find the model number on your Fridge & Freezer? Click here.

Safety note:

Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.

Latest Product Review(s)

4 Customer Review(s)

Easy to fit

Easy to fit but read the instructions that comes with the door seal :) . Did not expected that the original freezer door seal to be attached to the door and needed to be cut with a sharp blade, realised only after the door was starting to come apart in half. Only then I saw that the paper with instructions, which I tought is the invoice, and it was a five minutes job as expected. Fitted like a glove, can't fault it. Thank you RansomSpare

By Cristian Alexandru - London
24th Dec 2023

Overall

Quality

Value

Ease of Fitting

Works just fine

I had thought the original seal would just pull off and this new seal would be pressed in place but not so. The original seal needs to be cut off with a sharp knife which can be a bit daunting as once you have started cutting there is no turning back. Need to be a bit careful trimming the old seal so you don't cut into the hard plastic but quite easy once you start. Fitting the new seal was quite easy, I pushed both the corners in first then worked my way along the top followed by the sides then the bottom. For some reason the bottom section was very hard to push in but a drop of washing up liquid rubbed along the seal seemed to do the job. The new seal has been fitted for about 2 weeks now without any problems.

By Nigel McClelland - Newport
26th Sep 2023

Overall

Quality

Value

Ease of Fitting

Fridge Door Seal

Needed a bit of work to get it to fit, not straightforward. When fitted t did the job,

By Richard Wooller - Lydney
11th Oct 2022

Overall

Quality

Value

Ease of Fitting

Perfect fit

The original seal was mouldy and discoloured. I'm glad we've found Ransom Spares and I could replace it easily. I'm very happy with the product.

By Andy B - Maidstone
11th Aug 2019

Overall

Quality

Value

Ease of Fitting

Questions And Answers

1 Answer(s)
Please confirm that this will fit a 4 drawer freezer ERN 2821 92569467800 B256946 Thank you
By Patrick J - Tiverton - 08/07/2020
Hi Patrick, I can confirm this is the correct freezer seal for your model.
By Jordan - 08/07/2020
1 Answer(s)
I have integrated freezer AEG Arctis U 86050-4i Will it fit please (585mm high 572 mm wide
By Louise - Hull - 04/12/2020
Hi Louise, please submit a part enquiry including the PNC number beginning with 9 from behind the bottom freezer drawer so we can check this for you.
By Jordan - 04/12/2020
1 Answer(s)
Hi there, can you please confirm that part RS101897, is actually 2 products - 1 door seal for the fridge + 1 door seal for the freezer of Electrolux ENN2801AOW? Thanks a lot
By Pierre - London - 13/01/2021
Hi Pierre, this is only one seal.
By Jordan - 13/01/2021
1 Answer(s)
Hello. I am looking for a freezer door seal for my AEG fridge/freezer. AEG SCS 51800F0 Part number 925 705 689-01 ( I think).
By Jean - Maidenhead - 13/04/2021
Hi Jean, unfortunately the freezer seal for your model is no longer available so we cannot supply it. Please accept our apologies.
By Jordan - 13/04/2021
1 Answer(s)
What are the dimensions of the seal (height and width of the fixing slot in the door)?
By David - BATH - 07/06/2021
Hi David, this seal is 821 x 516mm.
By Jordan - 07/06/2021
1 Answer(s)
The actual dimensions of my existing seal which is the original are H830 W 523 will your seal still fit and seal ok?
By Richard - Solihull, Birmingham - 05/07/2021
Hi Richard, please submit a part enquiry including the full model details behind the salad drawer so we can check this for you.
By Jordan - 05/07/2021
1 Answer(s)
Hi, My Electrolux integrated Fridge freezer is model is ENN2754AOW, TYPE 1780CBFF50-T1 PNC 925504004 Ser No. 34500019. I need a new Freezer Door seal, could you please advise if this is the correct part. I'm not sure if this part is just a magnetic or the whole door seal includes which the magnetic ?) Thanks Colin
By Colin - Reading - 27/08/2021
Hi Colin, I can confirm this is the complete magnetic freezer door seal for your model.
By Jordan - 27/08/2021
1 Answer(s)
Will the seal fit the the freezer section of the AEG Santo C91842-5i. The PNC is 925 694 691. Thanks
By Joe - LONDON - 27/01/2023
Hi Joe, I can confirm this is the correct freezer door seal for your model.
By Jordan - 27/01/2023
1 Answer(s)
I am looking for a new freezer seal for ZBB2760sv. Is this the freezer seal and if so what does magnetic/non-magnetic mean?
By Julie - TODMORDEN - 23/08/2023
Hi Julie, please submit a part enquiry including the PNC number, beginning with 9, from the rating plate behind the salad or bottom freezer drawer so we can check if this is compatible with your model.
By Jordan - 23/08/2023
1 Answer(s)
Hi. I'm looking for a door seal for diplomat refrig-freezer 20070305520-038103004-03, APM6852 (freezer component). Is this suitable or could you please advise? Many thanks, Rob.
By Robert - Southampton - 24/08/2023
Hi Robert, unfortunately we're unable to supply the door seal required for your model. Please accept our apologies.
By Jordan - 24/08/2023

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed