Next Day Delivery Available
Electrolux Tumble Dryer Door Locking Cap Filter Guard
Suitable For Models Of: AEG, Arthur Martin, Bellavita, Bluesky, Corbero, Curtiss, Electra, Electrolux, Elektro Helios, Faure, Fors, Horn, Husqvarna, ... View All
£34.15
Or buy this item now
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Part is compatible with 
We are unable to confirm if this part will fit with model number ""Suitable For Models Of
AEG, Arthur Martin, Bellavita, Bluesky, Corbero, Curtiss, Electra, Electrolux, Elektro Helios, Faure, Fors, Horn, Husqvarna, Husqvarna Electrolux, John Lewis, Kuppersbusch, Listo, Lloyds, Marijnen, Matura, Norland, Novamatic, Philco, Privileg, Progress, Proline, Rex, Rosenlew, Selecline, Silentic, Tricity Bendix, Wyss, Zanker, Zanussi, Zoppas Tumble DryersDescription
This is a genuine locking cap filter guard for your tumble dryer.
Keeps your tumble dryer door securely shut during operation, preventing it from popping open and keeping your drying cycle accident-free.
If the locking cap feels loose or doesn’t hold the door securely anymore, that’s definitely something to address. A loose cap can allow the door to pop open during operation. Change it with this replacement part.
This locking cap filter guard for your tumble dryer door is from Electrolux. You can also check the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
Manufacturers Part Number:
- 1254245408
Alternative Part Numbers:
- 1254245010
- 1254245101
- 1254245119
- 1254245200
- 1254245218
- 1254245309
- 1254245408
EAN Number:
- 7321421037332
Will this part fit your appliance?
Use our compatibility checker, Click here.
Finding your model number:
Struggling to find the model number on your Tumble Dryer? Click here.
Safety note:
Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.
Latest Product Review(s)
Read All Reviews
9 Customer Review(s)
Good Replacement
The original filter guard seal had failed allowing lint and fluff into the outer door. The replacement arrived reasonably quickly and well packaged and is a genuine part. The old one has retaining clips, so these need to be compressed with a screw driver after the screws (x2) have been removed, but still needs a good yank to remove it. The replacement is slightly modified and doesn't have the retaining clips so is easy to fit. Overall the job only took 15 minutes. The drier now works fine with no escaping fluff which makes keeping it clean much easier. I hope this door seal lasts as long as the original as its not a cheap part.
By David Britton - Bristol
13th Jun 2024
Good replacement
Rubber seal on door locking guard had started to split and break away. Mind you, have had dryer for 15 years. Replacement part easy to fit by using the 2 screws from old guard. New guard doesn't have the openings for clips to make it more secure but that doesn't appear to make it a problem.
By Walter - Musselburgh
12th Jan 2024
Zanussi filter guard
Great replacement part for my tumble dryer. Quick and easy ordering and delivered quicly with no issues will use this company again. Thank you
By Kristian Hoyes - Anlaby
21st Oct 2023
ZANUSSI TUMBLE DRYER DOOR LOCKING CAP FILTER GUARD
This is a direct replacement for the worn out Guard. The previous one lasted 15 years, used multiple times daily, so it has done well :) The rubber surround wears and eventually disintegrates allowing the hot air to escape into the wrong section of the dryer. Fitting is just two screws to remove the old (plus some clips that need pressing in with a flat blade screwdriver), new one then clips into place and re-use the same screws from the old one. Seal is now like new again and drying time has been reduced. It's an original part so lets hope the new lasts as long as the old one.
By Richard - Sidcup
15th Feb 2022
Easy to fit even for me.
Quick delivery, easy to fit. Had two items and both quick delivery and easy to install following utube video.
By Glyn Thomas - Caernarfon
21st Oct 2021
Dryer part
Had a little bit of a wait but came very well packaged and is really good quality fits the drier and does the job thank you ☺️
By David Phillips - Birmingham
27th Jul 2021
Great service, excellent product
I was delighted to find that Ransom spares could provide the parts needed for my tumble dryer. The website was a joy to use making it extremely easy to select the necessary parts. They came in a timely manner, were well packed and fitted perfectly. Tumbler is now in perfect working order I would definitely use Ransom again for any spares I need.
By Tony - Moore
2nd Oct 2020
tumble dryer spare
exact replacement, simple to fit, seems a little expensive
By les - durham
31st May 2017
Replacement product
Great replacement part, perfect fit,good quick delivery will certainly use ransomspares in future for any parts needed.
By Paul Boyd - Belfast
14th Feb 2017
Questions And Answers
1 Answer(s)
This door cap fits the Electrolux T37800 Drier and variants.
My drier is a John Lewis JLDV02 variant and I have been trying to remove the cap but in addition to the two screws that hold it in place there are four rectangular slots on the cap - one above and below the screw on either side ie 4 in all.
I cannot work out how to release the catches in the four slots.
Anyone have any ideas?
Hi Alec, I'm afraid we are unable to give advice on how to fit the parts. We would recommend contacting the services of a qualified person, or taking a look at our advice center.
1 Answer(s)
I own a Zanussi ZDC37201W the filer guard I’d part marked 125 424 50 @ 125 424 51 I believe this the same item. Am I correct ? Kind regards. Adrian Cross
Hi Adrian, I can confirm this is correct for your model.
1 Answer(s)
I have a zannussi zdc46130w will this part fit as the rubber around the join has broken off
Hi Fiona, I can confirm this is correct for your model and is supplied with the seal.
