How to replace the pump in a dishwasher

In this video article we'll be showing you how to replace the pump in a dishwasher.  We're demonstrating on a Hotpoint dishwasher but the process is similar on all makes and models.

You might also be interested in the following articles:

• How to fix a dishwasher that is not draining
• How to replace the drain hose on a dishwasher
• Cleaning and replacing your dishwasher filters

Remove the plug from the socket

First of all before we start, always remember to remove the plug from the socket before carrying out any repairs.

Lay the dishwasher on it's back

The drain pump on a dishwasher will always be located at the bottom of the machine so the first thing we need to do is get access to the underside by turning the dishwasher on it’s back.  Before you do this make sure that you’ve emptied the dishwasher of any water and it’s always a good idea to lay it back on to a couple of towels to protect it.

Detach the drain hose from the pump

As you can see this dishwasher has a base cover which is held in place by two clips and needs removing.  The pump will have the drain hose connected to it so simply follow the drain hose and this will lead you to the pump.

Remove and replace the pump

This pump is held in place with a bayonet fixing.  We just need to depress this clip and twist the pump anti clockwise to release it.  Remove the wire block connector and replace the faulty pump with a new one.