Henry Hoover Repairs and Common Faults

Have you got a problem with your Henry vacuum cleaner?  Has Henry stopped working or is working, but intermittently? If so then watch our video on how to fix the problem, or follow the guide below.

Always be safe when you’re carrying out repairs by ensuring that plug of the appliance has been removed from the socket.

Henry Hoover is running intermittently

If Henry cuts out when you move the power cable where it attaches to the plug then the connection in the plug should be checked.

If the plug checks out to be fine then it is likely to be the copper contacts on the cable reel moulding.  Check out our video on how to replace the cable reel moulding and contacts.

Henry Hoover is not working at all

If Henry is not working at all then it is likely to be one of the following faults:

•    First of all, check the fuse and connections in the plug.
•    Next check the on/off switch – check out our video on replacing the on/off switch.
•    Next check the Hi/Lo switch and speed PCB – check out our video on replacing the PCB.
•    Next check the motor carbon brushes.  Again, check out our video on replacing the motor/carbon brushes.

The Henry vacuum cleaner is a relatively simple design and a step through fault diagnosis is easy to undertake in order to isolate which component is at fault and replace it.  You can buy all the necessary spare parts to repair you Henry vacuum cleaner online at Ransom Spares.